How do you use the Kreepy Krauly pool cleaner?
How do you use the Kreepy Krauly pool cleaner?
- Turn off the pool’s water filtration pump.
- Place the Kreepy Krauly into the shallow end of the pool and allow it to sink to the bottom.
- Fill the Kreepy Krauly hose with water from the garden hose.
- Connect the water-filled hose to the pool inlet hole, or to the skimmer hole if you do not have a dedicated inlet.
Where do you put the weights on a creepy crawly?
Weights weigh approximately 0.25kg each and are sold separately. The hose weight should be installed on the first hose that connects to the Kreepy Krauly Head, about one third of the way up the hose.
What setting should my pool pump be on to vacuum?
For routine vacuuming, the filter valve is left in the normal “Filter” position. This directs dirty vacuum water through the pool filter to remove the contaminants, then conveys filtered water through return lines back to the pool. The “Filter” setting is used for light to moderate levels of pool sediment.
Why does my pool cleaner go in circles?
Your first issue is to resolve the problem of the cleaner getting stuck or going in circles. This is most likely caused when pool cleaners are left in the pool 24/7. When the water is cold or cools off from a warm day, the plastic in the hose gets a memory and curls slightly.
Why does my creepy crawly keep stopping?
If Kreepy Krauly slows or stops and air bubbles enter the pool at the return line. Find and correct the air leak that is causing the pump to draw air: Check the hose to ensure there are no leaks in the hose, or between hose sections.
Why does Kreepy Krauly stay in deep end?
zea3. Usually if the Kreepy Krauly is staying in one end of the pool the problem is 1 of 3 things. The flow of water from the return is keeping the KK in one area, or the hose may not be the correct length, or the hose may not have the correct balance. You can read more about how to fix the problem here.
Do you leave skimmer basket in when vacuuming pool?
Now, here answers the question earlier: do you leave skimmer basket in when vacuuming pool? YES, you need to remove the skimmer or strainer basket before attaching the open end of the hose to the inlet. Finally, plug the open vacuum hose into the suction port.