How do you reset the timing belt on a Toyota?

How do you reset the timing belt on a Toyota?

Press and hold the odometer/trip display button whilst turning ignition on. Hold button down for 5 seconds then release button. Within 5 seconds, press and release the button. The display will show the reset value.

How do you reset the timing belt light on a 2006 Toyota Land Cruiser?

Turn the ignition to on position without starting the engine, hold the button for about five seconds. Press the tripmeter reset button and release, the display will show a number, see below picture. Now press again the tripmeter button and hold down for about 5 seconds, until on the display shows the ODO.

How long does it take to reset a timing belt?

Step 1: Preparation. First, prepare your car and work area. Changing a timing belt and water pump can take anywhere from 1-3 hours depending on your skill level, so make sure you have the time and space to complete the job.

How do you reset the timing belt light on a 2009 Toyota Land Cruiser?

2008-2015 Toyota Land Cruiser J200 T-belt Light Reset Guide

1. Start at this stage with the ignition on.
2. Go to the ODO screen.
3. Turn off the ignition.
4. Hold down the TRIP button, and turn on the ignition.
5. Continue to hold the TRIP button for 5 seconds.
6. Release the button and then press it again.
7. Hold down the button again.

How do you turn off the timing belt light on a Toyota D4D?

How to Reset a Hilux D4D T-Belt Light

1. Switch ignition on and select “odo”
2. Switch ignition off.
3. Press selector and hold for 5 seconds, don’t let go.
4. Switch ign.
5. Release selector, number 15 will apear.
6. Press selector 15 times.
7. Press and hold selector untill odo re-apears.
8. Start vehicle, T-belt light is off.

How do you reset the timing belt on a Toyota Innova?

Set the cluster on odometer value then ignition off keep pressing the trip butten ignition on keep 5 second then release the butten again press that time we can see numerical number keep number five and long press all right warning reseted.

How do you turn off the timing belt light on a Landcruiser?

a) After setting the replacement setting value, hold the trip switch ON for more than 5 seconds then release the switch. b) Check that the display has now changed back to ODO and that the warning light has gone off when the engine is started.